Specificationstechnical
FAD capacity by working pressure and operating parameters.
Motor power: 185 kW (250 HP)
MA-185 capacity by working pressure| Pressure | psig | FAD flow rate | m³/min |
|---|
| 7,5 bar | 109 psig | 1.075 cfm | 30,4 m³/min |
|---|
| 8,5 bar | 125 psig | 1.061 cfm | 30,0 m³/min |
|---|
| 10,5 bar | 150 psig | 972 cfm | 27,5 m³/min |
|---|
| 13 bar | 189 psig | 839 cfm | 23,8 m³/min |
|---|
MA-185 technical specifications| Parameter | Value |
|---|
| Compression stages | 1 |
|---|
| Ambient temperature | ≤46 °C |
|---|
| Relative humidity | 80 % |
|---|
| Compressor speed | 3.550 rpm |
|---|
| Discharge temperature | ≤ Ambient temperature + 15 °C |
|---|
| Displacement control | 50~100 % |
|---|
| Engine | YE2-225M1-2 B35 |
|---|
| Motor speed | 3,550 rpm |
|---|
| Motor efficiency | 93.2 % |
|---|
| IP / insulation class | 54 / F |
|---|
| Service factor | 1.2 |
|---|
| Fan | 600FZL-C6P37S4K/1300W-4P |
|---|
| Cooling air volume | 24.400 m³/h |
|---|
| Voltaje (modificable) | 220 V / 230 V / 440 V / 460 V or 480 V / 60Hz / 3 ph · ±10% |
|---|
| Drive | Direct drive 1:1 |
|---|
| Starting | Star-delta |
|---|
| Protections | High temperature, high voltage, overcurrent lockout, phase loss, unstable voltage |
|---|
| Lubricant grade | ISO 46 |
|---|
| Lubricant quantity | 120 L |
|---|
| Noise level | 75±3 |
|---|
| Outlet connection | DN80 in |
|---|
| Weight | 3340 kg |
|---|
| Dimensions | 2.65 × 1.70 × 1.85 m |
|---|
Specifications are taken from the Masia Compressors technical data sheet; values may vary depending on configuration. Check with our team. m³/min values are calculated from the flow rate in cfm.
