Specificationstechnical
FAD capacity by working pressure and operating parameters.
Motor power: 15 kW (20 HP)
Capacity by working pressure of the MA-15| Pressure | psig | FAD flow rate | m³/min |
|---|
| 7,5 bar | 109 psig | 89 cfm | 2,5 m³/min |
|---|
| 8,5 bar | 125 psig | 88 cfm | 2,5 m³/min |
|---|
| 10,5 bar | 150 psig | 66 cfm | 1,9 m³/min |
|---|
| 13 bar | 189 psig | 65 cfm | 1,8 m³/min |
|---|
MA-15 technical specifications| Parameter | Value |
|---|
| Compression stages | 1 |
|---|
| Ambient temperature | ≤46 °C |
|---|
| Relative humidity | 80 % |
|---|
| Compressor speed | 3.550 rpm |
|---|
| Discharge temperature | ≤ Ambient temperature + 15 °C |
|---|
| Displacement control | 50~100 % |
|---|
| Engine | YE3-132M2-2 |
|---|
| Motor speed | 3.550 rpm |
|---|
| Motor efficiency | 90.3 % |
|---|
| IP / insulation class | 54 / F |
|---|
| Service factor | 1.2 |
|---|
| Fan | 400FZL-C6P40SK/250W4P |
|---|
| Cooling air volume | 5.000 m³/h |
|---|
| Voltaje (modificable) | 220 V / 230 V / 440 V / 460 V or 480 V / 60Hz / 3 ph · ±10% |
|---|
| Drive | Direct drive 1:1 |
|---|
| Starting | Star-delta |
|---|
| Protections | High temperature, high voltage, overcurrent lockout, phase loss, unstable voltage |
|---|
| Lubricant grade | ISO 46 |
|---|
| Lubricant quantity | 10 L |
|---|
| Noise level | 66±3 |
|---|
| Outlet connection | 1-1/4 in |
|---|
| Weight | 300 kg |
|---|
| Dimensions | 1,25 × 0,87 × 1,06 m |
|---|
Specifications are taken from the Masia Compressors technical data sheet; values may vary depending on configuration. Check with our team. m³/min values are calculated from the flow rate in cfm.
